Cisco

Cisco revs up storage connections for DCs and WANs

Pro
Image: IDGNS

20 October 2016

Data is piling up, and storage keeps getting faster thanks to flash, so the networks that link it all together need to keep up, too.

Both traditional Fibre Channel and more general-use protocols used in storage keep steadily ratcheting up performance. Cisco Systems has boosted the speed of long-distance storage links for disaster recovery and business continuity. It has also introduced higher speeds for IP (Internet Protocol) storage networks in data centres and enhancing its software to simplify storage management.

Fibre Channel hangs on as the glue that binds together storage area networks (SAN) because it is dependable and secure, said 451 Research analyst Steven Hill. The majority of large enterprise installations use it even though typically cheaper IP-based systems like iSCSI have been around for years, he said.

But Fibre Channel doesn’t reach far enough to connect two storage systems in different metropolitan areas, so enterprises need something more if they want to replicate their data between widely separated SANs. The main reason for that kind of setup is the need for business continuity and rapid recovery from a disaster.

To help its MDS 9700 storage switch better connect Fibre Channel systems over wide-area networks, Cisco is introducing a SAN Extension Module with more ports and higher speeds for Fibre Channel over IP (FCIP). The new module has eight ports of 10-Gigabit Ethernet, up from four ports of Gigabit Ethernet for this purpose on the previous line card. The new card will also be able to host two 40-Gigabit Ethernet ports next year through a software upgrade at no extra cost.

Cisco also introduced new speed options for IP storage networking on its Nexus 9000 Series data-centre switches. The new options allow for 25Gbps, 50Gbps and 100Gbps connections. Up to now, the 9000 series has offered IP storage connections at 10Gbps and 40Gbps. The 25/50/100-Gigabit speeds are popular mostly for big cloud-scale companies that deploy equipment very densely and need as much speed as possible at each port, analyst Hill said.

Another advancement is designed to streamline storage management. Cisco is enhancing its Data Center Network Manager (DCNM) software, which is used for managing both SANs and LANs, by combining it with some storage array management functions. DCNM can automatically kick off actions on the array when the administrator does certain configurations on the SAN.

This could make some common storage setup processes easier. For example, creating a storage volume, assigning it to a host, and assigning that host to a target used to require administrators to switch back and forth between separate pieces of software for managing the SAN and the array. Now it all happens on one screen, and that process should be simplified down from 40 clicks to 3 clicks, Cisco said.

Cisco is extending this to arrays from Dell EMC, IBM and other vendors through application programming interfaces and standard interfaces.

 

 

IDG News Service

Read More:


Back to Top ↑

TechCentral.ie